Category Archives: Basics

Basis

Build a hardened ESXi 6.5 image for HPE hardware

As part of the series for ESXi 6.5 this post should give you an idea of how to handle a ESXi image build in detail. No long introduction. Let’s start:

Preparation

  1. Get you the latest ESXi 6.5 offline bundle available from
    VMware Patch Repository (MyVMware Login required)

  2. Get the required drivers and agents from HPEFirst check the recipe for the right firmware and driver combinations. This maybe requires you to update firmware on your boxes.
    HPE ProLiant server and option firmware and driver support recipe 

    Download the required drivers for the latest folder container esxi-650-* hierachie
    http://vibsdepot.hpe.com/hpe/nov2016/
    (alternatively you could connect this online, but have to build the image without a proper internet connection)

    The “esxi-650-devicedrivers” folder contains the right offline bundles for the drivers. Pick the ones you need for your hardware. If you have no idea how to find our what driver is required, please play around a little bit with the “esxcfg-*” commands on the ESXi Shell. List your network and storage adapters on an existing ESXi, best installed with vendor image, and note down the drivers are used.

    The “esxi-650-bundles” contains all additional agents and tooling. Just download the hpe-esxi6.5uX-bundle-* file as this does contain the  hpe-smx-provider CIM provider integration you need for proper hardware monitoring.Some of the drivers are double zipped. Just extract the first layer so you have the offline bundle. The second zip file should not contain any further *.zip file, but *.vib or a vib20 folder.

  3. Setup a PowerCLI 6.5 environment on a compatible Windows machine

Build

  1. Load the VMware ESXi vanilla image
    Add-EsxSoftwareDepot .\ESXi650-201703002.zip
  2. Clone it for further modification
    PS> Get-EsxImageProfile | Select Name
    
    Name
    ----
    ESXi-6.5.0-20170304101-standard
    ESXi-6.5.0-20170304101-no-tools
    Select the standard image. For other patch offline depots you might see for Image Profiles. Pick the standard one without “s” behind the number.
    New-EsxImageProfile -CloneProfile ESXi-6.5.0-20170304101-standard -Name "ESXi-650-custom-hpe-hardened"  -Vendor "schoen computing"
    The Acceptance Level gets automatically inherited from the source image. You don’t need to explicitly specify the parameter.

  3. Remove packages
    Remove-EsxSoftwarePackage -ImageProfile ESXi-650-custom-hpe-hardened -SoftwarePackage xhci-xhci
    I removed these packages for my use case:
    sata-ata-piix
    net-usbnet
    sata-sata-sil
    lsi-msgpt2
    scsi-megaraid2
    scsi-mptspi
    ata-pata-hpt3x2n
    shim-libata-9-2-1-0
    net-forcedeth
    scsi-mpt2sas
    ata-pata-pdc2027x
    scsi-megaraid-mbox
    lsu-hp-hpsa-plugin
    ata-pata-cmd64x
    ata-pata-serverworks
    lsu-lsi-mpt2sas-plugin
    ata-pata-atiixp
    shim-iscsi-linux-9-2-2-0
    mtip32xx-native
    scsi-adp94xx
    nmlx4-en
    lsu-lsi-lsi-msgpt3-plugin
    misc-cnic-register
    scsi-bnx2i
    net-bnx2x
    net-fcoe
    scsi-aacraid
    scsi-qla4xxx
    scsi-megaraid-sas
    ata-pata-sil680
    scsi-iscsi-linux-92
    scsi-aic79xx
    net-nx-nic
    shim-libfc-9-2-1-0
    net-bnx2
    ata-pata-via
    lsu-lsi-megaraid-sas-plugin
    i40en
    net-cnic
    net-vmxnet3
    emulex-esx-elxnetcli
    shim-libfc-9-2-2-0
    nvme
    scsi-ips
    qfle3
    net-enic
    scsi-bnx2fc
    net-mlx4-en
    shim-libfcoe-9-2-2-0
    nvmxnet3
    sata-sata-nv
    vmware-esx-esxcli-nvme-plugin
    lsu-lsi-lsi-mr3-plugin
    net-cdc-ether
    usb-storage-usb-storage
    sata-sata-promise
    scsi-mptsas
    scsi-hpsa
    nmlx4-rdma
    ata-pata-amd
    pvscsi
    net-mlx4-core
    shim-libfcoe-9-2-1-0
    lsi-mr3
    nhpsa
    shim-vmklinux-9-2-1-0
    block-cciss
    scsi-fnic
    lsi-msgpt3
    nmlx4-core
    qlnativefc
    shim-libata-9-2-2-0
    lpfc
    nmlx5-core
    sata-sata-svw
    ima-qla4xxx
    nenic
    elxnet
    qedentv
    sata-sata-sil24
    shim-iscsi-linux-9-2-1-0
    This list does also contain drivers now get removed, but later added from the HPE depot in a newer version.

    Attention: Not all packages can be removed in the listed order as there dependencies between them. If the CLI does not allow you to remove a package as it is a required for another package, just remove the other first and try again.

  4. Export the stripped image
    Export-EsxImageProfile -ImageProfile ESXi-650-custom-hpe-hardened -ExportToBundle -FilePath .\ESXi-650-custom-hpe-hardened.zip
    This image now does contain only the left packages. I prefer now to close the PowerCLI session and load the exported image in a new session like in step 1.

  5. Add HPE offline depots
    Add-EsxSoftwareDepot .\<hpe driver/bundle>.zip
    Add all downloaded and extracted zips in the way above.

  6. Add the HPE packages to the image
    Add-EsxSoftwarePackage -ImageProfile ESXi-650-custom-hpe-hardened -SoftwarePackage <package name>
    The package names can be get from the offline depot zip files. These contain a folder for each package name in  vib20  folder. For my use case these packages were added:
    net-bnx2x
    hpe-esxi-fc-enablement
    net-bnx2
    misc-cnic-register
    qfle3
    scsi-mpt2sas
    lpfc
    hpe-smx-provider
    net-cnic
    nhpsa
    scsi-bnx2fc
  7. Export the finale image
    Export-EsxImageProfile -ImageProfile ESXi-650-custom-hpe-hardened -ExportToBundle -FilePath .\ESXi-650-custom-hpe-hardened.zip
    
    Export-EsxImageProfile -ImageProfile ESXi-650-custom-hpe-hardened -ExportToIso -FilePath .\ESXi-650-custom-hpe-hardened.iso

     Keep the ZIP store anywhere as you can use it for updating and extending the image.

ESXi security/hardening - ESXi image

First part of the series. As mentioned in the overview VMware provides a newly called “Security Configuration Guide”, but this don’t really faces the first part in hands-on, when elaborating a hardened hypervisor approach. All starts with the image we pick – it is the foundation of security. Just think of you are designing a bank depot for storing all the money. The holy grail – the money – is stored in the basement and the entrance of the building above the ground is highly secured by policemen staying at the doores and windows, but the basement has several holes for cooling, wastewater, etc, which are not secured anyhow. That’s not what we want to have with the hypervisor. So what are possible holes in our ESXi image?

  • ESXi Web Services
  • ESXi UI
  • CIM Server
  • OEM management agents
  • OEM tooling
  • serveral other services (just check firewall list on the Security configuration tab in ESXi)

These are services listening on the ESXi for providing data to vCenter or other management services. Some may be wanted, others not. Ok, fair enough, nice to know, but how this relates to the ESXi image? My main focus is to strip down the ESXi images as best as possible to guarantee functionality but don’t offer a high attack vector. So if we can remove unneeded services listening on any port, we can reduce the attack vector, so the attacker has not much possibilities to find any weakness in the system. But before removing anything, we need something we can remove things from. Picking the right base image is key. So what choices do we have for a base image:

  • VMware ESXi vanilla image This is offered only on the VMware website. It does not contain any relation to a specific hardware vendor. The driver set is integrated is capable to support most hardware on the HCL. It does not contain any OEM agents or services.

  • OEM ESXi image  For the most vendors this is also offered on the VMware website and is marked as a vendor specific image. This image was built based on the VMware vanilla image. Additional vendor specific agents, drivers and tools were added to it, to support all the hardware the vendors has certified to the hypervisor version it was built for, to remote manage the hardware by vendor management tools and run firmware updates for the underlying hardware on the hypervisor.

It should be now very clear what are candidates for a removal:

  • OEM management agents Don’t trust any of these agents. Many of them caused PSODs for my customers and offer often bad secured services to the outside. But be aware a lot of this agents are bundled with the CIM integrations provided from the vendor. CIM provider integrations are something we want to have in the image to not lose track of the hardware outages. The vendor integrations are mostly much more powerful compared to what VMware provides via generic interfaces.

  • Drivers in general (optional) Drivers, independent if they were provided by VMware of the OEM, are not really a security concern, as they are only used if a matching devices is present. I like to remove the unneeded ones anyway to keep the image as clean as possible. Most customers have a static bill of material for hardware and so it is very easy to pick the required drivers and strip out the left ones.

  • OEM tooling A lot of hardware vendors provide extra tooling for example for running firmware upgrades on the ESXi Shell or to read configuration out of the BMC boards or BIOS. This is nice, but really unwanted. Like I don’t want to provide capabilites to bridge the isolation between hypervisor and VMs and also don’t want to do the same between hypervisor and hardware.

  • Unwanted functionality This is the most complicated part of the hardening. To chose the right default functionality, is not build into the kernel, can be removed. Good candidates are GUIs, like HTML 5 GUI or the USB 3 drivers.

This should be all for now. There is a good question coming up how to remove all this drivers/agents/tools/functionality from my image? I prefer the VMware Image Builder CLI based on PowerCLI. With 6.5 you also have the chance to use a Web Client GUI for it as part of the Auto Deploy feature.

However you alter your image, please do yourself the favor and document it!

For getting an idea how specific steps in the reality look like, please check the example for HPE hardware linked below:

Build a hardened ESXi 6.5 image for HPE hardware    

VMware Validated Designs does not exclude Stretched Cluster in general

Working as an architect in the VMware space you will sooner or later come across the VMware Validated Designs (VVD). Just a few weeks ago the latest version 4.0 was released to make adjustments for vSphere 6.5. It can be found here:

VMware Validate Designs Documentation

The designs are a great source for building your own architectures or building architectures for customers. The incorporated component architectures are natively built for availability, reliability and scalability. These are exactly the main goals I try to put in the designs I create for customers. The VVDs show up a good practise for a detailed setup that can be used for several use cases like Private Cloud or VDI deployments. VMware Cloud Foundation also makes use of the VVDs for its implementations.

But apart from this I also like to treat them as a framework which gives me the chance to keep the setup supported by VMware but also adjust it to the customer needs and make it fit like a second skin based on customers requirements.

Across their history they mainly relied/rely on a two region concept with one primary and fail-over region. This is a quite common architecture for U.S. setups. In the European space and especially in Germany customers often stick their existing architectures based a two datacenters setup working as an active/active pair. If you see this also as a two region setup or you would aggregate this into one region like me, is up to you. I prefer one region because the datacenters are in a short distance because of their synchronous replication/mirroring and so they build up a logical domain because for their active/active style.  This is why I split the region down to two physical availability zones (AWS term) and one virtual across two datacenters. This does not need to be undestand now, it will get clearer in later chapter.

In my understanding the VVD framework needs some extension in regards to Stretched Clusters and this is why I like to set up a series which guides through a forked version of the VVDs I personally use for customer designs:

  1. General thoughts
  2. Additions/Changes to physical architecture
  3. Additions/Changes to virtual architecture
  4. Additions/Changes to cloud management architecture
  5. Additions/Changes to operations management architecture
  6. Additions/Changes to business continuity architecture

Stay tuned!

 

 

 

 

 

1. Teil – vCenter Dienstestatus

Mit dieser Reihe will ich mich mit Ihnen durch die VMware Infrastruktur durchwühlen und die typischen immer wieder gern gesehen Problemstellen aufzeigen. Öffnen SIe dazu mal Ihren vCenter Client und verbinden sich mit Ihrem vCenter Server. Das ganze sieht dann wie folgt aus.
vCenter Server - Home Ansicht

vCenter Server – Home Ansicht

Das rot umrandete ICON ist der vCenter Dienstestatus, auf den Sie jetzt mal klicken..
vCenter Dienstestatus

vCenter Dienstestatus

Ups, da sind ja Warnung, die sind wohl durchgegangen. So oder so ähnlich ist das in 90% aller Fälle wenn ich das erstemal bei einem Kunden den vCenter Client nutze. Die häufigsten Warnung stammen – von einem nicht deinstallierten VMware Converter vor dem Update auf eine neue vCenter Server Version – von nicht laufenden Jobs des SQL-Server Agent – von alten nicht mehr genutzten oder aus Demozwecken installierten Plugins In diesem Fall lag die Situation etwas anders aber vielleicht habt Ihr eine Lösung. Ich würde mich freuen wenn Ihr schreibt. Schaut wieder rein und haltet den vCenter Dienstestatus grün.

Basics Basics Basics

Hallo@all, wie ich in den letzten Monaten, im Rahmen von HealthCheks immer wieder feststellen muss, sind Basics für viele Betreiber von VMware Umgebungen ein Fremdword. Aus diesem Grund werde ich in den nächsten Wochen dies mal hier thematisieren und Euch aufwecken. Also schaut regelmässig rein und prüft mal Eure Umgebung. Lasst Euch nicht erwischen sonst müsst Ihr einen Kaffee ausgeben… In diesem Sinn und lässt Euch nicht erwischen 😀